[GreenKeys] ASR33 paper advance

[zeke440 .]

look at Bul 310B Vol 2 section 574-122-700TC pg 90... there is a platten pressure adjustment

andy


 

> To: iamvirtual at gmail.com; greenkeys at mailman.qth.net
> From: teletypeparts at aol.com
> Date: Mon, 16 May 2011 16:05:05 -0400
> Subject: Re: [GreenKeys] ASR33 paper advance
> 
> 
> 
> 
> 
> Barry, 
> 
> Likely your paper is slipping. Maybe your roll is rubbing on the cover or some other resistance. Also the platen or small roller that grips the paper could be binding. Check out those issues. There is no adjustment to the pressure on the paper. 
> 
> Wayne
> 
> 
> -----Original Message-----
> From: B M <iamvirtual at gmail.com>
> To: greenkeys <greenkeys at mailman.qth.net>
> Sent: Mon, May 16, 2011 10:28 am
> Subject: [GreenKeys] ASR33 paper advance
> 
> 
> On my ASR33, the paper does not does not advance when the platen
> dvances. If I apply pressure to the paper, pushing the paper against
> he platen, the paper does advance in unison with the platen. Is
> here any adjustment for the amount of force the rollers apply to the
> aper so that there is pressure being put onto the paper so that the
> laten can advance it? The platen itself seems awfully hard and is
> ery smooth.
> Any ideas?
> Many thanks for any information you suggest.
> --barrym
> _____________________________________________________________
> reenKeys mailing list
> ome: http://mailman.qth.net/mailman/listinfo/greenkeys
> elp: http://mailman.qth.net/mmfaq.htm
> ost: mailto:GreenKeys at mailman.qth.net
> This list hosted by: http://www.qsl.net
> lease help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html