[GreenKeys] Fwd: Fwd: Kybd broken stud repairs

[Teletypeparts]

One last try on the graphics.  





-----Original Message-----
From: Teletypeparts <teletypeparts at aol.com>
To: greenkeys <greenkeys at mailman.qth.net>
Sent: Thu, Jun 2, 2011 7:19 pm
Subject: [GreenKeys] Fwd: Kybd broken stud repairs


Maybe the graphics will come out better this time.




----Original Message-----
rom: Teletypeparts <teletypeparts at aol.com>
o: greenkeys <greenkeys at mailman.qth.net>
ent: Thu, Jun 2, 2011 7:14 pm
ubject: Kybd broken stud repairs

ob,

et me post the long version of the kybd broken spring stud repair.  

ll the other ideas are fine, mine is the easiest if it works in your situation.  
 
emove the spring and contact wire associated with it.  Normally the spring 
ooks like this 

_OOOOOOO_)

ake a new end on the spring so it looks more like this:

_OOOOOOO_
         )


einstall with the new end just over the plastic frame exactly where the stud 
roke off.  The new end will be sharp where you cut it with the wire cutters and 
ill usually hold fine as it is biting into the plastic frame.  As I said 
efore, just make sure it does not touch the adjacent springs or metal bottom of 
he TTY tray.

 had to think about the graphics awhile.  LOL.

ayne 
B1FDW


_____________________________________________________________
reenKeys mailing list
ome: http://mailman.qth.net/mailman/listinfo/greenkeys
elp: http://mailman.qth.net/mmfaq.htm
ost: mailto:GreenKeys at mailman.qth.net
This list hosted by: http://www.qsl.net
lease help support this email list: http://www.qsl.net/donate.html