[GreenKeys] Items FS - pickup in northern CA

[Craig S McCartney]

Greenkeyers,

 

I am cleaning out in preparation for building a new garage on the site
of my existing carport.  All of the following TTY-related items are in
the way and I would like to dispose of them somewhere other than a
dumpster.  I am unable to pack and ship, so all of the items below are
pickup only, SFO bay area, Northern California. 

 

I have set the prices very low and am offering the items only on this
list to assure that the stuff goes to a good home.  If there is no
price, the item is free if you are buying and picking up another item.
For some items I have pictures that can be emailed to you.

 

*****************************

HAL DS3100 System, c/o DS3100 ASR Video Display Terminal, MSO3100
Message Storage Option, MPT3100 Message Processing Terminal, DSK3100
Disk Storage and RMX-3100:  

   The DS3100 (s/n 758) c/o a 12" green CRT (DV3000) bolted atop the
keyboard/electronics package; the MSO3100 and MPT3100 are installed
internally.  The DSK3100 (s/n 182) and RMX3100 (s/n 104) are in separate
3 1/2" rack mount cabinets.  A DS3100 is the last and best electronic
RTTY terminal prior to the use of personal computers.  This is the
system I operated in northern New Jersey in 1982 for the use of Vic
Poor, W5SMM, while he was sailing the Atlantic.   That experience
inspired APLink, the predecessor to WinLink.  

   A complete set of original manuals is included.  I think I can locate
most of the original cables.  A floor stand with custom terminal board
may be available.  

   

$50 OBO

 

*****************************

HAL CT2200 Communications Terminal, RTTY:

   This is an early 'glass TTY'.  The internal TU has performance like
an ST-5, perfect for use with your local VHF RTTY repeater.  This unit
started life as a CT-2100 and was later upgraded.  Unit requires an
external video monitor, standard NTSC 75 ohm.  I have one or two that
can be included. 

   Complete with KB-2100 keyboard and set of four original manuals.  

 

$10

 

*****************************

HAL ARQ1000 Error Correction Terminal, AMTOR:

   This unit was used with the DS-3100 system above to add AMTOR to the
mailbox.  This is only a code converter (TOR to/from ASCII or Baudot) -
data in and out; no audio; it needs an external TU and display or KSR.  

   Complete with original manual.  This unit most likely works fine, but
has not been tested so please consider it in as-is condition.  s/n 108

 

Free with other purchase.

 

*****************************

HAL ST-6 Demodulator:

   This one has been hacked on a bit.  I got it used and then made some
changes, as I recall.  By the looks of the front it may include a UART
for regeneration.  It does include the AK-1 tone generator.     

   Complete with manual. 

 

$20

 

*****************************

TTY Loop patch panel:

     Consists of 6 rows of 24 1/4" NC jacks per row mounted (144 total)
on an insulated panel.  I wired up the jacks on the back so that each
group (of 4, I think) was an isolated loop.  You can rewire it any way
you like.  It will mount in a 19" rack, after a fashion.  I have some
cords that I made for use with this panel and if I find them they will
be included.

 

$5

 

*****************************

Ribbons for Model 28(?):

   These were actually purchased for the old Epson dot matrix printers
and come with a blank take-up spool.  I am pretty sure they also fit the
Model 28. They are marked Black Pearl Spool Ribbons, Order Number 6252. 

     I have two six-packs and several singles. 

 

Free with other purchase. 

 

*****************************

 

I am only about halfway through the storage area and my find more
goodies.  I will update this listing in that case.

 

(Please, no eBay reselling, that will put you on my sh*t list forever.)

 

Craig McCartney

WA8DRZ

wa8drz at arrl.net