[GreenKeys] screws

[Larry Tighe]

Paul in CA is... arubmec at pacbell.net

Lar
----- Original Message ----- 
From: <teletypeparts at aol.com>
To: <greenkeys at mailman.qth.net>
Sent: Monday, May 17, 2010 12:53 PM
Subject: [GreenKeys] screws


>
>
>
>
> Teletype lists the mounting screws as 192289 Screw, 1/4-14 Self Tapping. 
> You can use a sheet metal screw from the hardware store, but the pitch is 
> not the same and once you use it, you cant go back to the Teletype screw. 
> The length should not be too long or it can protrude into the printer or 
> call unit as I recall.  I have stripped a couple of the plastic nuts and 
> its a lot of work to get to the base to replace one, so its best to use 
> the Teletype screw if possible.  I would think that 
> steveripper at comcast.net or Paul in San Francisco (I have lost his last 
> name and email) might have these screws.  He was featured on Greenkeys and 
> his web site was available.  Lots of parts for Teletype and expecially 
> 28's.
>
> Can someone help with his name and email for my records please?
>
> Thanks,
>
> Wayne
> KB1FDW
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html