[GreenKeys] How to mount reader power pack in ASR33 stand?

[Don Robert House]

Hi Charles,

There are two spring clips that hold the power supply to the top of  
the pedestal / stand.
I will send you images of the way it works.  If yours are missing I  
can come up with some for you.

Don
K9TTY


On 13 May 2007, at 7:30 PM, Charles wrote:

I have an ASR33 on a stand, and a separate 183079 reader power
supply (mounted with the 850 ohm resistor in a 182134 bracket).
There is a pictorial (a silver label inside the stand) showing
that the power supply should be located in the stand near the top,
with the Molex connector facing out/rearwards.

The p/s housing only has two #6 tapped holes about 3/4" apart on
the back side as well as a pair of thin slots at each end that
look like they might accept a mounting tab of some kind. But there
is no corresponding pair of holes or tabs anywhere in the stand or
the TTY base casting. How is this unit intended to be mounted? Am
I missing a bracket of some kind, or is this the wrong part?

thanks
Charles
_______________________________________________
GreenKeys mailing list
GreenKeys at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/greenkeys