[GreenKeys] Need Molex part numbers for connectors on ST6

[Don and Diana Cunningham]

Sorry, Jim, I "fat fingered" the first number, it is, of course, 03-09-1031 
(not 1061 like the 6 pin, hi).  All else is as Bill sent it!
73,
Don
----- Original Message ----- 
From: "Don and Diana Cunningham" <wb5hak at duracom.net>
To: "Jim Pruitt" <wa7duy at charter.net>; "RTTY Greenkeys" 
<greenkeys at mailman.qth.net>
Sent: Friday, May 26, 2006 9:07 PM
Subject: Re: [GreenKeys] Need Molex part numbers for connectors on ST6


> Jim,
> Bill Henry from Hal sent this info to me a couple of years ago in answer 
> to the same questions about my ST-6000.  I looked these up in the Mouser 
> online catalog, but don't remember if I found them all or not.  I don't 
> remember which is male and female, but the list should tell you in 
> Mouser's catalog. All pins are 0.093".  03-09-1061 and 03-09-2031 are 3 
> pin and 03-09-1061 and 03-09-2061 are 6 pin.  Hope this helps!
> 73,
> Don, WB5HAK
> ----- Original Message ----- 
> From: "Jim Pruitt" <wa7duy at charter.net>
> To: "RTTY Greenkeys" <greenkeys at mailman.qth.net>
> Sent: Friday, May 26, 2006 8:59 PM
> Subject: [GreenKeys] Need Molex part numbers for connectors on ST6
>
>
>> Can anyone tell me what Molex part numbers I need to order for the 3 and 
>> 6
>> pin Molex plugs I need to order to mate with the 3 and 6 pin sockets on 
>> the
>> back of an ST6 and that series converters?  Does Molex still make those
>> connectors?
>>
>> Thank you.
>>
>> Jim Pruitt
>> _______________________________________________
>> GreenKeys mailing list
>> GreenKeys at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/greenkeys
>>
>
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys
>