[GreenKeys] Need Molex part numbers for connectors on ST6

[Don and Diana Cunningham]

Jim,
Bill Henry from Hal sent this info to me a couple of years ago in answer to 
the same questions about my ST-6000.  I looked these up in the Mouser online 
catalog, but don't remember if I found them all or not.  I don't remember 
which is male and female, but the list should tell you in Mouser's catalog. 
All pins are 0.093".  03-09-1061 and 03-09-2031 are 3 pin and 03-09-1061 and 
03-09-2061 are 6 pin.  Hope this helps!
73,
Don, WB5HAK
----- Original Message ----- 
From: "Jim Pruitt" <wa7duy at charter.net>
To: "RTTY Greenkeys" <greenkeys at mailman.qth.net>
Sent: Friday, May 26, 2006 8:59 PM
Subject: [GreenKeys] Need Molex part numbers for connectors on ST6


> Can anyone tell me what Molex part numbers I need to order for the 3 and 6
> pin Molex plugs I need to order to mate with the 3 and 6 pin sockets on 
> the
> back of an ST6 and that series converters?  Does Molex still make those
> connectors?
>
> Thank you.
>
> Jim Pruitt
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys
>