[GreenKeys] oops. e-clip?

[Eugene Hertz]

Hello all,

got myself into a bit of a bind.  In attempting to see if this newly modified spring (that solved my bit#3 problem) was to blame for the clunking sound when entering FIGS mode, I decided to remove the spring to see if the clunking went away. Well, it did not. So I decided I could safely reconnect my spring and continue to search elsewhere.

In trying to put the spring on, I seem to have sprung a tiny little e-clip (or c-clip forget which it is).  the spring mounted on a little roller and the roller was held onto a little post by a little e-clip.  LUCKILY! I have found both the roller and the clip buried in the mass of metal bars of the keyboard. Don't ask how I found them!

Any way, I got the roller in position, but how the heck does one put this e-clip back on? First there is VERY little room between all the things in this area of the printer. But should this clip go on over the face of the post? Or perpendicular to the post with the ends of the clip being forced open as it overcomes the diameter of the post and then finally coming to rest as it passes the widest part of the post? 

Either way, this will be a task!
Eugene