[GreenKeys] 28 pparts

[Don Robert House]

If I had the parts from our museum and these that Scott has I could  
help everyone.  I do not have spares here now at this time.  Perhaps  
later this year.  My cargo trailer is empty right now.

Don


On Jun 24, 2006, at 7:29 PM, Eugene Hertz wrote:

> oops. forgot the attachment.
>
> -----Original Message-----
> From: Eugene Hertz [mailto:ehertz at tcaf.org]
> Sent: Saturday, June 24, 2006 07:27 PM
> To: 'Scott Johnson'
> Cc: drhouse at nadcomm.com
> Subject: Re: [GreenKeys] 28 pparts
>
> Hi Scott. I am desparately looking for three parts. Could I ask you  
> to check your stash? These are for a 28 ASR. Part numbers are:
>
> spring 152724 (2 needed). This can be seen on page "D" of the  
> attachment
> h-lever  159880  (1 needed). This can be seen on page "B" of the  
> attachment, used for an LPR typing reperf
> oil felt 152457 (1 needed). This can be seen on page "C" of the  
> attachment, used also on the LPR. right-most side of this page "C"  
> about 1/3 down the page.
>
> Please let me know if you might have this. Would be happy to pay  
> for the items plus postage. I have cc'd Don just in case!
>
> Thanks
> Eugene
>
> >-----Original Message-----
> >From: Scott Johnson [mailto:scottjohnson1 at cox.net]
> >Sent: Friday, June 23, 2006 06:22 PM
> >To: telegrapher at att.net
> >Cc: 'GreenKeys List'
> >Subject: Re: [GreenKeys] 28 pparts
> >
> >Larry-
> >I have a good share of Jay Waller's model 28 parts, I would like  
> to get
> >them into someones hands other than mine. I have all kinds of  
> springs,
> >bushings, screws and felts, all are new. If anyone is interested in
> >being the keeper of these, please come forward. The only caveat is  
> that
> >they need to be made available to greenkeyers for no charge, other  
> than
> >shipping.
> >
> >Scott
> >
> >
> >telegrapher at att.net wrote:
> >> Hope this isn't a sore spot but, anyone know what happened to  
> all the
> >> tty parts that were left over from that estate in Western New  
> Mexico
> >> this past year. Fellow was a member of the list. bet he had the
> >> springs etc. that folks are looking for these days. Matter of  
> fact if
> >> you've got a junker or an extra front plate, parts might be  
> there. I
> >> know someone who needs a spring for the selector clutch assembly in
> >> the event you've got and extra clutch around, for that end of the
> >> mainshaft that is.
> >>
> >> Larry
> >> W0OGH
> >>
> >> _______________________________________________
> >> GreenKeys mailing list
> >> GreenKeys at mailman.qth.net
> >> http://mailman.qth.net/mailman/listinfo/greenkeys
> >>
> >_______________________________________________
> >GreenKeys mailing list
> >GreenKeys at mailman.qth.net
> >http://mailman.qth.net/mailman/listinfo/greenkeys
> >
>
> <h-lever reset bail spring.pdf>