[GreenKeys] Power cord for UGC-74 etc.

[Jack]

I had to put a bunch of jumpers inside the plug to set it up for 110VAC. It
was easier than bringing the AC back and fortha few times. I didn't make a
diagram, unfortunately.

Jack WA2HWJ



----- Original Message -----
From: "Don Robert House" <drhouse at nadcomm.com>
To: "Scott Johnson" <scottjohnson1 at cox.net>
Cc: "Teletype Friends" <greenkeys at mailman.qth.net>
Sent: Saturday, January 21, 2006 6:37 PM
Subject: Re: [GreenKeys] Power cord for UGC-74 etc.


> I have a diagram from Buzz that shows how to rewire them.  I will
> check them out.
>
> Thanks for the tip.
>
> Don
>
>
> On 20 Jan 2006, at 9:53 PM, Scott Johnson wrote:
>
> Don- Beware these cords, I think they need a pin swap for 115VAC
> Anyone care to comment?
>
> Scott
> ----- Original Message ----- From: "Don Robert House"
> <drhouse at nadcomm.com>
> To: "Teletype Friends" <greenkeys at mailman.qth.net>
> Sent: Friday, January 20, 2006 4:51 PM
> Subject: [GreenKeys] Power cord for UGC-74 etc.
>
>
> > Thanks much to Al, Buzz, and Roy among others for the great
> > information on the UGC-74.
> >
> > I was able to order a new old stock power cord from FAIR RADIO for
> > $20.00
> > They also have the Signal Cables for $22.00
> > They also have the universal 115vac power cord that fits a vast
> > array  of military test equipment for $12.00
> >
> > Don
> >
> >
> > Don R. House K9TTY
> > drhouse at nadcomm.com
> >
> >
> > _______________________________________________
> > GreenKeys mailing list
> > GreenKeys at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/greenkeys
>
>
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys