[GreenKeys] Looking for power cable

[roy.morgan at nist.gov]

Quoting Don Robert House <drhouse at nadcomm.com>:

> I am looking for a 115vac power cable for an AN/UGC-74.
> 
> Please advise if you have one available or have the knowledge and  
> piece parts to make one.

Don,

A quick look at the maintenance manual I have here indicates that there is a
thing called the "Power Input Interface" that may consist of a cable with two
connectors. It's likely that this is already in your unit.  The Connector that
appears to accept many different kinds of power is J2.  The cable connector
that goes to that has jumpers and connections different for 120vac, 220vac or
DC power.  That info is here in a drawing.

Presumably this manual gives specs on the connector needed, one of which you
would be wise to track down (Wm Perry comes to mind immediately.)

With the info that I assume is in this manual, you'd have the knowlege needed. 
(I did not cull all the info I could from this manual, just took a quick
look.)The piece parts are the connector, a few bits of wire, and a line cord.

Let me know if you'd like me to persue this further. I can copy the essential
parts of this manual.  Presumably if I had the right connector I could make you
a cable, but it's unlikely I have the connector.  It's remotely possible that
nearby RF Connections has one.
 
Roy

Roy Morgan
7130 Panorama Dr.
Derwood MD 20855