[GreenKeys] Interesting Model 28 scenario

[Larry Tighe]

Thank you Russ,

I'll print this out and take it home.

Lar
----- Original Message ----- 
From: <WA3FRP at aol.com>
To: <larryradio at worldnet.att.net>; <greenkeys at mailman.qth.net>
Sent: Thursday, November 17, 2005 12:16 PM
Subject: Re: [GreenKeys] Interesting Model 28 scenario


> Larry,
>
> I believe that you will find that there is an adjustment in the Spacing
> Drum, that large round wheel on the right side and front of the typing 
> unit.
>
> On the spacing drum, there are five bolts that hold the front and rear 
> rings
> to the Spacing Drum.  To number the bolts, the #1, #3, and #5 bolts  are
> round headed and #2 and #4 are hex headed.
>
> The rear ring controls the right margin.   It can be adjusted by 
> loosening
> #1, #2, #3 and #5 bolts.  You should not loosen #4 as this  controls the 
> front
> ring (for left margin).  You can easily move the rear  ring with a
> screwdriver. Moving the rear ring counter-clockwise will lengthen  the 
> line.  Take small
> steps, tightening the bolts between steps, and your  M28 should be fine.
>
> 73 de Russ WA3FRP
>
>
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys