[GreenKeys] Fwd: TTY Connect panels

[Richard M. Gillingham]

Gil, what ever happened to the punched panels??  I sent Scott a note back in 
September, and again more recently and have heard nothing.  I can wield a 
soldering iron okay, but my metal work sucks.

Any info would be appreciated.

Gil, W1RG
----- Original Message ----- 
From: "gil smith" <gil at vauxelectronics.com>
To: <greenkeys at mailman.qth.net>
Cc: <Scott.Johnson at motorola.com>
Sent: Tuesday, August 10, 2004 3:39 PM
Subject: [GreenKeys] Fwd: TTY Connect panels


> Hi folks:
>
> Scott (who is not on greenkeys, but is building a unit), has volunteered 
> to cut the hole patterns for folks who are using the Sescom chassis -- see 
> below.  Let me know if you are interested.
>
> Yes, I still need to get firmware and its doc online.  As soon as I can 
> clear a day, I will try to get things wrapped up, but have been busy 
> prepping for a tradeshow.
>
> On an unrelated note, I ran across something some of you may find 
> interesting:  a linux distro that is fully contained on a cd-rom.  You can 
> simply boot the cd, and work in linux, without any hard-disk installation 
> at all.  If you go to www.knoppix.com, you can download a 700-MB iso image 
> (took over an hour with a cable modem), and use your favorite cd-rom 
> burner in raw mode to put this on a blank cd.  Then just boot it (provided 
> your machine boots from cd).  Kinda cool and minimally-intrusive way to 
> play with linux, without a complicated install process, and without 
> disturbing your winblows installation.  Worked very well on one of my 
> desktop machines, worked well on an older laptop that had no hard disk 
> (except it did not see the network pcmcia card).  Did not work on two 
> other machines. FWIW.
>
> gil
>
>
>>From: Johnson Scott-AZAX60 <Scott.Johnson at motorola.com>
>>To: "'gil at vauxelectronics.com'" <gil at vauxelectronics.com>
>>Subject: TTY Connect panels
>>Date: Tue, 10 Aug 2004 12:06:55 -0700
>>
>>Gil-
>>Please let members of the greenkeys list know that I am willing to make 
>>front and rear panels for the Sescom cabinet for the cost of the aluminum. 
>>I will also make the same cutouts on a 2 or 3 U 19" panel if desired.  I 
>>have the means to duplicate several quickly.
>>
>>regards,
>>
>>Scott V. Johnson
>>Principal Staff Scientist
>>Microelectronics and Physical Sciences Laboratory
>>Motorola Labs, Tempe AZ
>>Phone 480-413-5139
>>Mobile 480-682-7219
>>Fax   480-413-5453
>>
>
> ;-------------------------------------------------------------------------
> ;  vaux electronics, inc.             480-354-5556
> ;  www.vauxelectronics.com    (fax: 480-354-5558)
> ;-------------------------------------------------------------------------
>
> _______________________________________________
> GreenKeys mailing list
> GreenKeys at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys