[GreenKeys] ST-6 success!

[Eugene Hertz]

Thanks to everyone with the suggestions! I  now have a working ST-6!!!

I reseated all the boards and that seem to do it! Don't ya just love the simplest solutions!  I am very pleased that this old workhorse is still working!

Thanks!
Eugene

>-----Original Message-----
>From: Don and Diana Cunningham [mailto:wb5hak at duracom.net]
>Sent: Sunday, July 17, 2005 05:33 PM
>To: 'Eugene Hertz', greenkeys at mailman.qth.net
>Subject: Re: [GreenKeys] ST-6 help?
>
>Eugene, 
>First, are you sure that the boards have been plugged into the proper slots 
>(since they were all out -- common ST-6 problem, by the way, you will 
>probably do it moving in once or twice, hi hi)?? If they are, and you are 
>sure you have selected the proper speed, you are probably right, there was 
>either a build problem or they need to be tuned. I sent the toroid tuning 
>procedure article and a troubleshooting article by Hoff from old QST's to 
>the website, but have never seen them incorporated. Maybe it was a 
>copyright problem?? If you need a copy of each, let me know and I'll see 
>about copying them for you. Might take a while, but I'll get it done if you 
>need. The tuning procedure is "sort of " covered in the manual, but this 
>article sure makes it clearer. 
>73, 
>Don, WB5HAK 
> 
>