[GreenKeys] getting started with rtty

[gil smith]

Hi Jack:

<shameless plug>

Well, if your TU outputs 232 (std or mil polarity), you can hook it to 
TTY-Connect.  It can take baudot from the TU at 60-, 66-, 75-, or 100-wpm, 
and convert it to ascii at 110-baud, to drive your M33 on the low-voltage loop.

You already have the pcb Jack, but you will also need the micro.

</shameless plug>

gil


At 10:23 PM 2/3/2005, Don Robert House wrote:
>Does anyone do RTTY with ASCII ?   I have assumed everyone was still using 
>BAUDOT (ITA)
>
>Don



Vaux Electronics, Inc.
480-354-5556
(fax: 480-354-5558)
www.vauxelectronics.com