[GreenKeys] Tech tip for today...

[Don Robert House]

Folks,

Remember to not let your 32 heat up.  There should be vent slots in 
the plastic cover under / behind the paper roll.   After the machine 
gets hot, the heat starts to melt the print hammer head.  George was 
experimenting with some material to make print hammer heads.  I have 
forgotten what the material was.  I will be doing some more 
experimenting later this month.

Happy new year,

Don






>On Wed, 1 Jan 2003, Don Robert House wrote:
>
>>  120 - 130 volts DC, 60 ma to the mounting cord.  To work in the local
>>  mode the dial has to be blocked in an off-normal position.
>
>So that's how you do it. I always resorted to pulling the dial plug
>from the ccu. Blocking the dial is better as the lights still work.
>My 32 & 33 only get exercised during winter holiday season,unless a
>special project is underway.
>
>	Chuck
>	kb4new
>	cswiger@widomaker.com


-- 
--------------------------------------------------------
Don Robert House
North American Data Communications Museum
URL: http://www.nadcomm.org
Computer Museum of America
URL: http://www.computer-museum.org