[GreenKeys] Perforator Print Hammers; WC2XPF

[Chuck McManis]

At 09:58 AM 3/2/02 -0800, George B. Hutchison wrote:
>I will use one of the new ones for a "template" and see what can be done
>make a suitable replacement. The biggest problem is the small square hole
>through the center, but possibly a hot, square mandrel run through the
>center of the piece will do the trick.

Do you have a caliper? If you could provide a measured drawing then it 
would be possible to machine them (or have them machined) as delrin is 
fairly easy to work with.

--Chuck