[GreenKeys] Yes, Virginia, there is a Model 15 Auto CR-LF

Tue, 12 Feb 2002 18:07:59 -0500

Hi All,

Well I found the part on my M19 that does the automatic CR/LF and I removed the
part that actuates the LF.  Now I dont get the extra LF.  Great!!!!!

I also discovered it has the motor stop contacts too.

Many thanks for all the help in clearing this up for me.  Im learning more every
day.

Regards,
Jeff

Ralph Mowery wrote:

> The automatic CR/LF was an option for the modle 15 type printer.  I have
> not seen one but it is listed in a manual I have.  .  From the Bulletin
> No. 144 issue 2 dated Sept. 1944.
>
> There are several other options listed.  One is a motor stop.  You send
> a FIG and H and the motors on all the connected printers will stop.
> Assuming hardwired machines, to get the motors started again, the line
> is opened for a short time usually by pressing the BREAK key.
>
> Tabulator function is activated by an upper case G or Z (upper case is
> from the manual, not me as we all know there are only upper case
> leters.).
>
> There is a Reperfarotor control by using the upper case H to start the
> reperf and upper case S to stop the reperf motor.  The TAB and motor
> stop of the model 14 printer must be disabled for this to work.
>
> DE KU4PT
>
> Jack wrote:
> >
> > I'm going to dig through some manuals to see if TTY did make an Auto CR/LF
> > kit for the the 15. I would assume it was only for the military (although my
> > TG-7A doesn't have it).
> >
> > Jack WA2HWJ
> >
> > _______________________________________________
> > GreenKeys mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/greenkeys
> _______________________________________________
> GreenKeys mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/greenkeys

--
Email   Jeff Seidel    [email protected]
See my railroad signaling pages at:  http://railroad-signaling.com