[GreenKeys] Yes, Virginia, there is a Model 15 Auto CR-LF

[Ralph Mowery]

The automatic CR/LF was an option for the modle 15 type printer.  I have
not seen one but it is listed in a manual I have.  .  From the Bulletin
No. 144 issue 2 dated Sept. 1944.  

There are several other options listed.  One is a motor stop.  You send
a FIG and H and the motors on all the connected printers will stop. 
Assuming hardwired machines, to get the motors started again, the line
is opened for a short time usually by pressing the BREAK key.

Tabulator function is activated by an upper case G or Z (upper case is
from the manual, not me as we all know there are only upper case
leters.).  

There is a Reperfarotor control by using the upper case H to start the
reperf and upper case S to stop the reperf motor.  The TAB and motor
stop of the model 14 printer must be disabled for this to work.

DE KU4PT


Jack wrote:
> 
> I'm going to dig through some manuals to see if TTY did make an Auto CR/LF
> kit for the the 15. I would assume it was only for the military (although my
> TG-7A doesn't have it).
> 
> Jack WA2HWJ
> 
> _______________________________________________
> GreenKeys mailing list
> GreenKeys@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/greenkeys