[GPS_Standard] Montrol Clear Current Stats button bug or feature ?

[Dimitri.p]

All I am talking about is the Current stats- the yellow section and 
whether or not it "resets" when hitting the "Clear Current Stats" 
button. It appears that it doesn't, unless Montrol is restarted.

Here is a screenshot of the incorrect calculation on 7 samples

Looking at  7 samples in the e-08 and e-09 range,  an average in the 
e-04 looks wrong without even working the numbers :)


and here is the manual version with the worked numbers:
9999999.87500000000000000 -1.25000000000000E-8
9999999.62500000000000000 -3.75000000000000E-8
10000000.31250000000000000  3.12500000000001E-8
10000000.06250000000000000  6.25000000000001E-9
9999999.81250000000000000 -1.87500000000000E-8
9999999.87500000000000000 -1.25000000000000E-8
10000000.12500000000000000  1.25000000000000E-8
Number of Samples:          7
Avg Freq Offset: -4.46428563445807E-9
Min:             -3.75000000000000E-8
Max:              3.12500000000001E-8


Dimitri


At 01:10 AM 11/8/2015, you wrote:
>Dimitri
>
>I just tried it on my Montrol to
>recheck, and No it does not clear All
>Stats (as a restart would) but the
>current cycle only, as I have always
>understood..  Mine was sitting on
>1.83e-10, and after clearing it came
>back 1.87e-08, however in the 16 cycles
>since I cleared it, now it shows
>3.29-10.  On one of the earlier cycles
>it actually said 0 offset, I have only
>ever seen that a few times.
>
>To reset, sort of like a restart, you
>can clear the Accumulated Stats, but
>that does not clear the previous cycle
>or the Current cycle, but you would lose
>all the historical data/Stats.  It would
>also clear the Number of Samples
>counter, but in MONTROL ONLY.  The GPSDO
>starts a fresh Sample Count ever time it
>starts another Sample series.  The
>actual total number comes from the (S)
>parameter in the Grey Parameter Panel.
>
>Neither Clear buttons have an effect on
>the state of what is going on in the
>GPSDO itself, the setup in the grey
>Parameter panel of Montrol controls how
>the GPSDO works.
>
>Pete
>ZL2iK