[GPS_Standard] Power supplies for standalone system with oscillator

[Bert, VE2ZAZ]

Hi John,

In case you have not seen it yet, Jacques - VE2AZX has done a pretty good
job of using the HP 5328A's built-in oscillator on his VE2ZAZ GPSDO. Have a
look at http://www.geocities.com/ve2_azx/ in the GPS_Freq_Reference.zip
file.

Bert, VE2ZAZ

----- Original Message -----
From: "John A. Evans - N0HJ" <jaevans at pcisys.net>
To: <gps_standard at mailman.qth.net>
Sent: Sunday, March 29, 2009 9:27 PM
Subject: [GPS_Standard] Power supplies for standalone system with oscillator


Greetings all,

  I'm torn between integrating (either totally, or partially) my board
with GPS receiver with a 5328a counter or building it totally standalone
since I have a separate oscillator from a parts 5328a.  I've not been
able to find one power supply that will power it all with +5V, +12V, and
something on the order of 20-30V for the oscillator.  Has anyone else
done this, and if so, what are you using for power for the standalone
system?

Thanks much,
john - n0hj

______________________________________________________________
GPS_Standard mailing list
Home: http://mailman.qth.net/mailman/listinfo/gps_standard
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GPS_Standard at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html