[GPS_Standard] Power supplies for standalone system with oscillator

[robert bownes]

well, the parts have not arrived yet, but I'm planning on building
mine into a Tektronix TM5000 series plugin. That way I can feed the
10Mhz right to the counters and prescaler on the backplane.

All the supply voltages are just a bonus.

Bob
KI2L

On Sun, Mar 29, 2009 at 9:27 PM, John A. Evans - N0HJ
<jaevans at pcisys.net> wrote:
> Greetings all,
>
>  I'm torn between integrating (either totally, or partially) my board
> with GPS receiver with a 5328a counter or building it totally standalone
> since I have a separate oscillator from a parts 5328a.  I've not been
> able to find one power supply that will power it all with +5V, +12V, and
> something on the order of 20-30V for the oscillator.  Has anyone else
> done this, and if so, what are you using for power for the standalone
> system?
>
> Thanks much,
> john - n0hj
>
> ______________________________________________________________
> GPS_Standard mailing list
> Home: http://mailman.qth.net/mailman/listinfo/gps_standard
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GPS_Standard at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>