[GE] Phoenix on 144.390

[Jim Shorney]

-----BEGIN PGP SIGNED MESSAGE-----

On Mon, 27 Oct 2003 17:50:15 -0500, Tim Osborne wrote:

>I have a plan to put one or two 2 channel units on the local packet APRS
>freq. of 144.390.
>I programmed one up this weekend and it has a solid 40 Watts out on TX.
>But my receiver is as dead as post.
>I have the service manual and adjusted the VCO voltage for max.
>
>Anybody made one work on 144.390 before?
>If so what components in the RX did you change?


Did the receiver work before?  Check the 2nd local oscillator crystal
on the RF board.  I've put two in 144.39 with no trouble.

- -- 
Jim Shorney      -->.<--Put complaints in this box
jshorney (at) inebraska.com
nu0c (at) amsat.org
Ham Radio NU0C
Lincoln, NE, USA
EN10ps
http://incolor.inetnebr.com/jshorney/
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBP52wKUCBN4ScxcExAQHZPAP+OhbOwZqLPrAROBWm2mdEcNx1cTWAHsoE
FeN1YjXi10R56S6NhMcnkK4Ch1BRt6OKweNZO3R4FIJPCXom9cWx26ZEXXJcsvfl
AizZKrsaHN6jdeNRUr4gNgl3UQ1POjjmQ/IGex4xCbmAoREUKH1OIO1rWhTUkB/u
qNLTnKaYGjM=
=Tka5
-----END PGP SIGNATURE-----