[Fox_Tango] Receiver monitoring ( YO-100 )

[af2c@njdxa.org]

Try the mod.  However, couple the scope to the IF through a 3pF 
capacitor.  You can drill another hole in the back "skirt" of the 101 and 
install another RCA jack with the capacitor installed on the inside of the rig.

The reason for the  3pF cap is to prevent the IF from being "swamped" and 
degrading your receiver.

GL es 73,
Jay/AF2C





At 07:41 AM 4/2/03 -0600, you wrote:
>I have a Yaesu YO-100 that I wanted to try receiver monitor on a FT-101E. 
>I have made the RCA cable connection from the FT-101E  IF Out to the 
>YO-100 J3 IF but nothing happens. I also see a modification of a small 
>cable run from the FT-101 IF  PB-1183. Has any of you ever tried this and 
>does it work ?
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>   text/plain (text body -- kept)
>   text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>Now, more than ever, QSL.NET is in urgent need of your financial support.
>
>Please help QSL.NET by sending a donation now.
>
>________
>_______________________________________
>Fox_Tango mailing list
>Fox_Tango@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/fox_tango



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---