[Fox_Tango] Need advice re no output on FT-101

Tue, 26 Mar 2002 23:06:13 -0500

I don't have the manual right now because it is packed away.  Is there
supposed to be a jumper on the back on the accessory plug?  If so, it is not
there.

Thanks, Joe.

----- Original Message -----
From: "Jordan" <[email protected]>
To: <[email protected]>
Sent: Tuesday, March 26, 2002 11:03 PM
Subject: Re: [Fox_Tango] Need advice re no output on FT-101

> Is the Jumper installed on the rear panel that allows Fil voltage to be
applied to the final tubes...?? 73 de Jordan...
>
> Joe Falcone wrote:
>
> > Hello:  I am new to the list.  I have a FT-101, serial number below
25,000.  I go this rig new in the box about 5 years ago and have not used it
much.  Somebody actually bought it when it was new and never opened it, and
then traded it into Henry Amps in California and I bought it from one of the
workers there.
> >
> > Anyway, I had used the rig before with no problems, but I had not used
it for about a year or so, and set it up and turned it on and the receive
works great.  I then turned on the Heater switch and the tubes did not light
up nor did I get any signs of life from them.On IC the meter shows no sign
of life.  Obviously, without the tubes lighting up, I was not surprised.
Thinking that I had fried the tubes in the past, although I could not
remember doing that, I ordered new tubes and put them in.  I flipped the
switch and still no life.
> >
> > The relay works but there is no signs of life to the tubes. .  Before I
send it away to be looked at, any ideas?
> >
> > Thanks, Joe N8TI
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > ---
> > _______________________________________________
> > Fox_Tango mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/fox_tango
>
> _______________________________________________
> Fox_Tango mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fox_tango