[ForSale-Swap] FS: icom R10 scanner with accessories

[goshawk]

hello list,
I have an Icom R10 handheld scanner to sell.
The Icom IC-R10 is a compact, rugged and high performance receiver.
All mode (FM, WFM, SSB, CW, AM) receiver
Newly designed 'busy catch scan'
Wide-band coverage with all mode receive capability (0.5 MHz to 1300 MHz)
Real-time bandscope
(a first for handhelds) making it easy to bind busy frequencies and see the
propogation
conditions of frequency bands.
Ample memory channels with memory name function
1000 memory channels are available in the IC-R10, and 8-character memory
names are
storable for each channel and each bank for easy recognition. In addition, a
maintenance
free EEPROM is employed for memories.
Improved receiver characteristics
Tuneable bandpass filters are employed in the IC-R10 to provide good image
and intermodulation
rejection characteristics, these are Programmable from a PC as well as
receiver
Useful scanning functions
Scan types include programmed, memory, bank, modes as well as a new scan
type,
'BUSY CATCH'
 scan for FM mode. The 'BUSY CATCH' scan searches for the next busy
frequency using
a 'para' receiver circuit while the actual receiver circuit is detecting a
signal
(scan pauses) Then, the actual receive frequency jumps to the next busy
frequency
when scan resumes. This speeds up the total scan speed.
VSC Function
Icom's original VSC (Voice Scan Control) is available - the first time on a
handheld
receiver. This function pauses during scan only when modulated signals are
received.
Multi function dot-matrix LCD
A multi function dot-matrix LCD is employed in the IC-R10 to display a great
variety
of information, such as receive frequency, mode, real-time band scope and
memory
names, etc.
Full computer access capability
The IC-R10 can be connected to your home computer for cloning, downloading
and receiver
control. With an optional CS-R10, memory contents, frequency, mode and
memory names,
etc. can be programmed or downloaded quite simply. The receiver control
system, Cl-V,
is employed in the IC-R10 to control receive frequency, mode and signal
strength,
etc. In addition, the IC-R10 has 2 separate connectors for cloning and Cl-V
connection.
EDIT
 switch provides easy editing or revision of memory contents.
Memory copy
Auto Mode and Tuning Step for simplified operation.
36 mm internal speaker for ample power output and clear audio.
AA Battery Power
4 AA size dry cells (or Ni-Cad batteries) can be installed or a 4.5-16V
external
power supply can be connected.
100 Hz frequency resolution.
Built-in 20 dB attenuator.
AFC function
Noise blanker and Auto Noise limiter
Receiving System
SSB, CW, FM Triple superheterodyne
IF Frequencies
1st - 266.70MHz / 429.10MHz
2nd - 10.7MHz
3rd - 455kHz
Sensitivity
(Except spurious points)
Frequency
FM
WFM
AM
SSB/CW
0.50 - 4.999MHz
0.5uV
-
1.6uV
0.4uV
5.00 - 74.999MHz
0.32V
-
1.0uV
0.25uV
75.00 - 199.999MHz
0.32uV
1.0uV
1.0uV
0.25uV
200.00 - 299.999MHz
0.4uV
1.3uV
1.3uV
0.32uV
300.00 - 699.999MHz
0.32uV
1.0uV
1.0uV
0.63uV
700.00 - 799.999MHz
0.79uV
2.0uV
2.0uV
0.25uV
800.00 - 899.999MHz
0.5uV
1.6uV
1.6uV
0.4uV
900.00 - 1400.00MHz
0.5uV
-
1.6uV
0.4uV
Selectivity
SSB / CW More than 4kH\ / 7dB
AM, FM More than 15kHz / 6dB
WFM More than 150kHz / 6dB
Audio Output
More than 100Mw at 10% distortion
Power Requirements
Internal - 4 x AA dry cell or Nicad
External - 4.8 - 16 volts DC
Current Drain
Rated Audio: 200mA
Standby: 110mA
Power Save: 38m
Weight
310g
Dimensions
48.5(w) x 130(h) x 31.3(d) mm

as well as the scanner and mains unit, I also have the computer cable and
software, these have never been used, but that is not all!
I will also include an all purpose preamp, this is brand new, and has never
been out of its box, it is fitted with BNC connections, so just right for
the scanner. I will top this package off by including a portable desktop
aerial, this has 2 telescopic aerials, 4 sucker feet, and a good length of
cable with BNC plug, so is also just right for the scanner and preamp,
again, the aerial has seen no actual use at all.
the actual scanner has only seen about 20 mins of use.
am looking for £200 for this whole package, but will consider sensible
offers.
if interested, either call on 02084785841, or email,
goshawk at bulldog-office.com

Simon