[ForSale-Swap] Tower Question

[Robert Nickels]

Dave,

That's the GA25GD Guy Bracket Assembly, and the addition of TB25D torque
arms are probably the best thing you can do for your Rohn tower.    A
recommended source for anything made by Rohn is Hill Radio of Bloomington
IL, http://www.hillradio.net/

Good luck and remember, safety first!

73, Bob W9RAN

----- Original Message -----
From: "Leisman" <wb8baf at voyager.net>
To: <forsale-swap at mailman.qth.net>
Sent: Thursday, September 12, 2002 7:40 PM
Subject: [ForSale-Swap] Tower Question


> Got a problem.  I'm erecting a 60' Rohn 25g tower.  Realizing I'm going
> to need guy wires, I need to purchase the assemblies which go around the
> three legs of the tower at the 30' and 60' levels and which then attach
> to torque arms and then the guy wires.
>
> Anyone know what these things are called?  Better yet, anyone have a
> soruce for purchasing these, along with the torque arms?
>
> Thanks to all for the bandwidth.
>
> Dave, W8QW
>
> ______________________________________________________________
> ForSale-Swap mailing list
>  FAQ: http://www.nethawk.com/1113/swap/swap.htm
> Home: http://mailman.qth.net/mailman/listinfo/forsale-swap
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:ForSale-Swap at mailman.qth.net