[ForSale-Swap] FS: Step Attenuators for RF testing

[Phil Atchley]

Hello
I have the following step attenuators for sale.  If you work with signal
generators, noise figure setups, and just about any RF related testing these
are very handy devices to have around.

Also VERY handy to use between your receiver and antenna as a variable
attenuator to prevent receiver overload on strong signals.

All of the following have BNC inputs/Output connectors, have a single knob
to step through the attenuation steps etc.

1.  Two RLC Electronics 0-12dB in 1dB steps, step attenuators.  50 Ohms
in/out, BNC connectors, good from DC to 1 GHz (per info from RLC).  Not a
current production unit, but RLC did provide me the specs.

2.  Connecticut Microwave Model CMZ-035A 0-110 dB attenuator in 10dB steps.
I checked with Connecticut Microwave and they no longer have any record of
this unit, so it's not a current production unit.

Using one of each type will give you 0-132dB of attenuation in 1dB steps.0

Price:  25.00 each PLUS shipping OR 60.00 for all three includes shipping to
lower 48. (Go in with a friend and buy all three)  If you buy 2 or more I'll
include short BNC cable jumpers to cascade them.

73 de Phil  KO6BB
Loving home provided for wayward Boatanchor Receivers
ko6bb at elite.net
Merced, Central California
37.18N 120.29W CM97sh



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.338 / Virus Database: 189 - Release Date: 3/14/02