[ForSale-Swap] Regency HR-2 crystals wanted

[ed sharpe]

Are we talking  regency scanners? or regency 2 way radios?
need some  early ones ( either scanners or the radios) non working ok for
the  i.d.e.a. regency display at the museum.
thanks Ed Sharpe Archivist for SMECC

see the museum at:
http://www.smecc.org
----- Original Message -----
From: "third Eric" <ejones at hiwaay.net>
To: <forsale-swap at mailman.qth.net>
Sent: Saturday, April 13, 2002 9:09 PM
Subject: [ForSale-Swap] Regency HR-2 crystals wanted


> de N4TGC Eric
>
> I'm needing a passel of xtals for my herd of Regency "collectibles" -
> which I use pretty well every day of the week ... the HR-2, 212, and -2A
> use 6mc xmit xtals, while the HR-2B uses 8mc.  Both use 45mc receive
> xtals, and all are in, if I have it right, JAN (Joint Army-Navy) HC-25
> holders: about 1/2" square, with .040 (1mm) pins spaced .192 (~5mm)
> apart.  I esp. need the following frequencies:
> HR-2B (8mc) xmit - 146.01 (need 3); 146.08 (3); 146.52 (2)
> HR-2 (6mc) xmit - 146.52 (2); 146.08 (2)
> 45mc Rx, both - three 146.52; four 146.68; two or more 162.475 (local
> WX channel)  Note that the actual rx xtal frequencies are f (-) 10.245,
> divided by 3.
>
> I will also buy entire radios, esp. if these channels are already in
> it.  It need not work or be complete, in any case.
>
> A goodly number of other brands use the same starting frequencies as the
> Regencies - esp. for the 45mc rx ones.  The absolute requirements are
> the size, and that they work in my radios!
>
> Responses may be slow, but the Eric is patient ... e
>
> ______________________________________________________________
> ForSale-Swap mailing list
>  FAQ: http://www.nethawk.com/1113/swap/swap.htm
> Home: http://mailman.qth.net/mailman/listinfo/forsale-swap
> Post: mailto:ForSale-Swap at mailman.qth.net
>
>