[ForSale-Swap] Regency HR-2 crystals wanted

[third Eric]

de N4TGC Eric

I'm needing a passel of xtals for my herd of Regency "collectibles" -
which I use pretty well every day of the week ... the HR-2, 212, and -2A
use 6mc xmit xtals, while the HR-2B uses 8mc.  Both use 45mc receive
xtals, and all are in, if I have it right, JAN (Joint Army-Navy) HC-25
holders: about 1/2" square, with .040 (1mm) pins spaced .192 (~5mm)
apart.  I esp. need the following frequencies:
	HR-2B (8mc) xmit - 146.01 (need 3); 146.08 (3); 146.52 (2)
	HR-2 (6mc) xmit - 146.52 (2); 146.08 (2)
	45mc Rx, both - three 146.52; four 146.68; two or more 162.475 (local
WX channel)  Note that the actual rx xtal frequencies are f (-) 10.245,
divided by 3.

I will also buy entire radios, esp. if these channels are already in
it.  It need not work or be complete, in any case.

A goodly number of other brands use the same starting frequencies as the
Regencies - esp. for the 45mc rx ones.  The absolute requirements are
the size, and that they work in my radios!

Responses may be slow, but the Eric is patient ...	e