[FADCA] Linux Telpac code compiled...

[Chuck Hast]

On 5/9/05, Russell Oder <oderr at bellsouth.net> wrote:
> Chuck, the -10 designation of Telpac Gateways is a convention, that, as
> necessary, can be modified as needed. I have several ROSE swtiches (to
> become FPAC) and I can not use -10 for my Telpac Gateways. As a result I
> used the ssids available -3 and -4.

OK, I am going to change the traceroute call to something else and see if  it
will work with the other linux boxes. If so then it is strictly for
the local user
access and I can make it something else, but if it has to have the -10 ssid in
order for the traceroute piece to work then I will have to use another ssid.

> 
> Also, please also submit an application for coordination by FADCA to make
> sure it gets in the FADCA database and we don't have any unforseen
> interference problems.
> 

OK, it co-located with my Linux FPAC switch and indeed is nothing more
than another application on the switch so it will have the same ports and
freqs as the rest of the switch.

Have you tried to ssh into my switch to play around with the commands?
Also if you guys can get one up and running there with a port on the internet
we can link the two switches and get some traffic flow that direction.


-- 
Chuck Hast 
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."