[FADCA] Re: ReMastering
Chuck Hast
wchast at gmail.com
Mon Jun 27 08:38:17 EDT 2005
On 6/27/05, Charles S Schuman <k4gbb at earthlink.net> wrote:
> Chuck Hast wrote:
> >
> > Back to the switch stuff, I hope that we can soon have that much desired CD that
> > will make the switch installs a lot easier.
> >
> I am closer to making that first Re-master. It takes a good deal of
> system setup before you even think about the changes you want to make.
>
> I spent most of the weekend worping a system into a Remastering
> configuration. I have all but one of the five needed partitions setup.
>
> The partition which holds the "new" system is done, but has a funny
> glitch. After I set-up the ax25, FPAC & TELPAC I found that I could no
> longer access anything outside my computer. After about four hours we,
> my son got dragged in on the problem, realized that the rose port had
> snagged the ip address for the dns/gateway server.
>
> Does anyone know how the rose port decides it's ip address? I see that
> my system @ work has snagged the same address, 192.168.0.1. There isn't
> a problem here because we use another sub-net.
>
Here is what mine come up as, I think it has to do with what address you give
as the IP address in FPAC but not sure, perhap Bernard can set up straight on
this one
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 ax0
44.0.0.0 * 255.0.0.0 U 0 0 0 sp0
44.0.0.0 * 255.0.0.0 U 0 0 0 sp1
44.0.0.0 * 255.0.0.0 U 0 0 0 nr0
44.0.0.0 * 255.0.0.0 U 0 0 0 rose0
44.0.0.0 * 255.0.0.0 U 0 0 0 rose1
44.0.0.0 * 255.0.0.0 U 0 0 0 rose2
44.0.0.0 * 255.0.0.0 U 0 0 0 rose3
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
root at fpac-dev:/etc/ax25#
--
Chuck Hast
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."
More information about the FADCA
mailing list