[FADCA] Linux FPAC "IS" working

[Chuck Hast]

Bill,
I fixed another on you had. In your axports file you had port 9 with a
sside of 19, remember that the protocol does ot allow ssid's higher
than 15, so I went in and set it to -15 and also octothorped the
line out as you are not using axip yet. As soon as we have axip
set up we can then start using it. Now we just have to get rid of the
nr error messages that appear when you attempt to log into fpacnode.

login as: root
root at n4xeo.no-ip.com's password:
Access denied
root at n4xeo.no-ip.com's password:
Welcome to Knoppix (Kernel 2.4.22-xfs)

You have new mail.
root at fpac:~# fpacnode
axutils: SSID must follow '-' and be numeric in the range 0-15 - W4AKH-19
axutils: SSID must follow '-' and be numeric in the range 0-15 - W4AKH-19
>>>>>>>>>>>>>> NOTE THE SSID >>>>>>>>>>>>>>>>>>>>>>>^^^^^^

axconfig: port 9 not active
THIS TOO^^^^^^^^^^^^^^^^^^

nrconfig: port 3 not active
nrconfig: port 4 not active

FPAC-Node v 3.26 (fpac)

callsign: kp4djt
FPAC-Node v 3.26 (F6FBB - Dec 18 2002) for LINUX (help = h)






root at fpac:/etc/ax25# fpacnode
nrconfig: port 3 not active
nrconfig: port 4 not active
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
JUST NEED TO FIX THESE

FPAC-Node v 3.26 (fpac)

callsign: kp4djt
FPAC-Node v 3.26 (F6FBB - Dec 18 2002) for LINUX (help = h)

W4AKH-8 (Commands = ?) :

Chuck Hast 
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."