[FADCA] Telpac Nodes in Florida - Update

[Russell Oder]

Hi, Doug. Makes me wonder also. My N4KOX-3 has been operating continously 
all this week and the map shows it red (as over 12 hours old.)  I shut my 
Telpac Gateway program down and then re-initialized it and it shows up as 
Green now.

Before I updated the software, it would show up Green even though I had not 
re-initialized it - after it had been red. Not sure why that happened. Folks 
were using it (WX4J and W4AWP). Don't know if that was the reason it turned 
Green.

Maybe your's got dropped from the list.  You might try exiting the program, 
reinitializing it after going thorough the motions of setting the APRS PARMS 
and see if that will turn it green.

Russ

----- Original Message ----- 
From: "Doug Ferrell" <kd4moj at kd4moj.org>
To: "Florida Amateur Digital Communication Association" 
<fadca at mailman.qth.net>
Sent: Saturday, December 17, 2005 7:37 PM
Subject: RE: [FADCA] Telpac Nodes in Florida - Update


> fadca-bounces at mailman.qth.net wrote:
>> Take a look at the Google Map http://www.winlink.org/positions/ and
>> zoom in on the Telpac nodes in Florida.  Some are for test purposes,
>> but most of the green dots show useable Telpac nodes on line.
>
>  Dont' know where that data is coming from but it's OLD. I'm not showing 
> up
> (KD4MOJ-10) and WA4WES-10 hasn't been transmitting for over two weeks...
>
> ...DOUG
> KD4MOJ
>
>
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca