[FADCA] FPAC Quick connects

[bud thompson]

I use call-8 for the node (to manually force subsequent connects out 
specific ports, etc.) and call-9 for the switch (automatic routing.)  This 
leaves call -1 through call-6 for quick connects to other network stations 
(BBS, Telpac, etc.)  It also leaves the call-0 for use by the owner of the 
call on his/her own packet station.

bud

----- Original Message ----- 
From: "Chuck Hast" <wchast at gmail.com>
To: "FADCA" <fadca at mailman.qth.net>
Sent: Tuesday, October 12, 2004 00:24
Subject: [FADCA] FPAC Quick connects


> Folks, was poking around the network a bit, and looking at the quick 
> connnects
> I was trying to figure out what the rest of you are using for your
> quick connect to
> the node app?
>
> Here in Tampa we have been using the switchcall-1, so if you connect to 
> any
> ssid of -1 you get the node app. Did not see that on any of the others I 
> could
> reach.
> Looks like -1 connects to I guess the associated BBS. I wanted to see what
> all else are doing as we would like to standardized ours here.
>
> Having a quick connect to the switch helps to probe things and force a 
> path
> to a neighbor switch when needed.
>
>
> -- 
> Chuck Hast
> To paraphrase my flight instructor;
> "the only dumb question is the one you DID NOT ask resulting in my going
> out and having to identify your bits and pieces in the midst of torn
> and twisted metal."
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>