[FADCA] No messages from Charlie

[bud thompson]

The Kantronics TNCs all have a KISS mode that may be used, also a HOSTE mode
as well as the standard CMD: mode.

If your FBB computer is running Windows you will have to use the Kantronics
TNCs in HOST mode.  I forget about how it all works in DOS FBB.. but it may
be KISS mode and some special drivers that FBB has for the Kantronics TNCs.
The Kantronics TNCs are excellent for BBS operation. If you every have plans
for a 9.6kb port, then getting a KPC9612 is indicated as you can use 1200b
on one port and 9.6kb on the other port with FBB.

bud

----- Original Message ----- 
From: <kf4uth@juno.com>
To: <fadca@mailman.qth.net>
Sent: Thursday, February 26, 2004 13:19
Subject: Re: [FADCA] No messages from Charlie


> HI BUD,
>
> W4LX IS STARTING TO GET SOME CHANGES.  WE HAVE WORKED ON SOME OF THE
> SETUP, BUT REALIZE MUCH NEEDS TO BE DONE.
>
> INFO IS NEEDED ON 'KISS MODE' TNC'S.  I THINK IT WOULD BE BEST TO
> STANDARDIZE WITH ONE MODEL IN PREFERENCE TO THE KAM3+ AND A DRSI CARD
> THAT HAS PART 'BURNED' OUT.  WE WILL TRY TO PUT THE 220 ON THE AIR THEN.
>
> WE ARE LOOKING AT RELOCATING THE RADIOS AND TNC CLOSER THAN THE THREE
> ROOM SPREAD AT PRESENT.  NEW CABLES WILL BE MADE AS SOON AS THE
> RELOCATION HAS BEEN ACCOMPLISHED.
>
> THANKS FOR THE HELP ON THE TNC INFO.  PURCHASE ORDERS REQUIRE A LOT OF
> INFO.
>
> 73,
> TOM, KF4UTH
>
> ________________________________________________________________
> The best thing to hit the Internet in years - Juno SpeedBand!
> Surf the Web up to FIVE TIMES FASTER!
> Only $14.95/ month - visit www.juno.com to sign up today!
> _______________________________________________
> FADCA mailing list
> FADCA@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>