[FADCA] PacComm Spirit 2 EPROM

[Chuck Hast]

On Fri, 17 Dec 2004 07:12:33 -0500, bud thompson <budt at cfl.rr.com> wrote:
> Thanks, John...
> 
> Hum.... forgot to try AGW Term..
> Winpack/AGW doesn't have a very robust command set, perhaps AGW term will
> let us get into CAL mode via BPQKISS.. will give it a try.
> 

No, for that you are going to need the eprom. KISS has no knowledge of how to
hancle the internals in that sence. Indeed the only thing you can do is send a
continuous stream of data at a kiss device in order to keep it on the
air, but there
is no way that it can put the TNC on the air sending a steady "high"
or "low" state,
which I suspect is what you are trying to do. If you are just trying
to set deviation
and check eye patterns then it can probably do the job.




-- 
Chuck Hast 
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."