[FADCA] Tampa Hamfest Plans

[Jdaughtry]

ok guys were is the hamfest located at in tampa
 I may get to slip off foor a few hours
john
----- Original Message -----
From: "Russell Oder" <oderr at bellsouth.net>
To: "Chuck Hast" <wchast at gmail.com>; "Florida Amateur Digital Communication
Association" <fadca at mailman.qth.net>
Sent: Wednesday, December 01, 2004 9:40 PM
Subject: Re: [FADCA] Tampa Hamfest Plans


> Thanks. Motorola guy did not come through in time to bring repeater. I
will
> call Linda. Got swamped with other domestic duties and work issues (even
> while off) and had to put car in shop, 3rd Alternator in about a year.
>
> I thought I would have a computer ready for Linux based FPAC but that did
> not get done either.
>
> Russ
>
> ----- Original Message -----
> From: "Chuck Hast" <wchast at gmail.com>
> To: "Russell Oder" <oderr at bellsouth.net>
> Cc: "Florida Amateur Digital Communication Association"
> <fadca at mailman.qth.net>
> Sent: Wednesday, December 01, 2004 5:41 PM
> Subject: Re: [FADCA] Tampa Hamfest Plans
>
>
> > On Mon, 29 Nov 2004 22:43:38 -0500, Russell Oder <oderr at bellsouth.net>
> wrote:
> > > Chuck, I need to call Linda tomorrow and see what things look like
> there.  I
> > > sent the TX levels to the Motorola guy here today and he said the Low
> Level
> > > (default) would be fine for the MSR2000 and MSF5000 repeaters.
> > >
> > > My manual was not complete enough to give me the tie in points from
the
> > > black plane of the repeater.
> > >
> > > He says we will need a relay to interrupt the TX PL and I suggested we
> could
> > > use a two pole relay on the PTT line from the controller to both
> interrupt
> > > the PL on Transmit in the repeater and provide PTT for the MSR2000.
> > > Apparently the MSF5000 will work without the relay (digital version
> only/).
> > >
> > > My plan, and he said he understood, is that he will provide me with
the
> > > tie-in points on the back plane and I can run the connections to a
DB25
> > > connector on the side panel (there is a punch-out for the DB25 on both
> MSR
> > > 2000 repeaters (VHF and UHF) and on the MSF5000 UHF and 900 Mhz
> repeaters.
> > >
> > > Bill, have you guys successfully attached a digital regenerator to one
> of
> > > your MSR2000s?
> > >
> > > Chuck, are there folks at PACCOMM who are familiar with this?
> >
> > I am back in town, but buried in work. Trying to get maps done so I can
> get
> > outta here for the setup and whatever else we need to do.
> >
> > You need to call Linda tomorrow and check it all out as she may not have
> > anyone there Friday, if she does not know you are coming.
> >
> >
> >
> > --
> > Chuck Hast
> > To paraphrase my flight instructor;
> > "the only dumb question is the one you DID NOT ask resulting in my going
> > out and having to identify your bits and pieces in the midst of torn
> > and twisted metal."
> > _______________________________________________
> > FADCA mailing list
> > FADCA at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/fadca
>
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.4.4 - Release Date: 11/30/04
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.4.4 - Release Date: 11/30/04