[FADCA] Tampa Hamfest Plans

[Chuck Hast]

On Mon, 29 Nov 2004 22:43:38 -0500, Russell Oder <oderr at bellsouth.net> wrote:
> Chuck, I need to call Linda tomorrow and see what things look like there.  I
> sent the TX levels to the Motorola guy here today and he said the Low Level
> (default) would be fine for the MSR2000 and MSF5000 repeaters.
> 
> My manual was not complete enough to give me the tie in points from the
> black plane of the repeater.
> 
> He says we will need a relay to interrupt the TX PL and I suggested we could
> use a two pole relay on the PTT line from the controller to both interrupt
> the PL on Transmit in the repeater and provide PTT for the MSR2000.
> Apparently the MSF5000 will work without the relay (digital version only/).
> 
> My plan, and he said he understood, is that he will provide me with the
> tie-in points on the back plane and I can run the connections to a DB25
> connector on the side panel (there is a punch-out for the DB25 on both MSR
> 2000 repeaters (VHF and UHF) and on the MSF5000 UHF and 900 Mhz repeaters.
> 
> Bill, have you guys successfully attached a digital regenerator to one of
> your MSR2000s?
> 
> Chuck, are there folks at PACCOMM who are familiar with this?

I am back in town, but buried in work. Trying to get maps done so I can get
outta here for the setup and whatever else we need to do.

You need to call Linda tomorrow and check it all out as she may not have
anyone there Friday, if she does not know you are coming.
 


-- 
Chuck Hast 
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."