[FADCA] Fbb & BPQ

Mon, 24 Feb 2003 11:39:42 -0500

Doug
    Below is one of the ports in my aa4re bbs. Note the com set to 127 
which equals the host interrupt in bpq. The port_type defines which 
virtual port (g8bpq_host-1, -2 etc)  is used - I have 4 that I use for 
forwarding. I assume that there are some similiar setting in fbb that 
are needed to communicate with bpq.
Hope this helps..
73  John

Port
  port_type               = G8BPQ-HOST-1
  com                     = 127
  call_set                = WB4MOZ-3
  max_pac                 = 236  
;was 255
  dflt_pac                = 236  
;was 255
  speed                   = 9600
  forward_group           = 1
  max_connect             = 8
  max_channel             = 9
  max_pending             = 2  
;was 4
  monitor                 = yes
  monitor_color           = 48
  time_out                = 900
  fwd_min                 = 0
  default_forward_order   = TA
  minimum_class_allowed   = new_user
  remote_sysop            = Y
  upload_download         = Y
  no_binary               = N
  broadcast               = Y
  port_name               = 145.030 Mhz
  broadcast_path          = WPLAN K4PKT-8
  reject_action           = 1
  reject_bulletin_action  = 0
  no_out_fwd              = Y
  no_busy_fwd             = N
  new_user_display_format = 0
  new_user_screen_length = 20
  new_user_transparency  = Y
  access_control         = R
  disconnect_delay       = 10
  remove_ssid_addresses  = N
endport

Doug Christ wrote:

>Here you go Bill.
>
>73, 
>
>Doug
>HOSTINTERRUPT=127
>EMS=0
>DESQVIEW=0
>NODECALL=W4MIN-1
>NODEALIAS=DESOTO
>BBSCALL=W4MIN
>BBSALIAS=DEOC
>IDMSG:
>Network node (DESOTO) W4MIN-1 Arcadia, Fl
>***
>UNPROTO=MAIL
>INFOMSG:
>BPQ Packet Switch/Node Desoto County, Florida
>To connect to another station type C port # call sign.
>You MUST specify a port number before the callsign ie. C 2 AE4IG
>Type P to use the PORTS command to list available ports.
>Type BBS and you will connect to the W4MIN BBS.
>Type N to list other Nodes and type C Node alias to connect ie. C EOCFMY
>***
>FULL_CTEXT=0
>CTEXT:
>CONNECTED to: DESOTO/W4MIN-1 BPQ NETWORK NODE/SWITCH TYPE ? for HELP>
>***
>OBSINIT=5
>OBSMIN=3
>NODESINTERVAL=60
>IDINTERVAL=60
>BTINTERVAL=0
>L3TIMETOLIVE=25
>L4RETRIES=10
>L4TIMEOUT=120
>L4DELAY=2
>L4WINDOW=4
>MAXLINKS=30
>MAXNODES=60
>MAXROUTES=35
>MAXCIRCUITS=64
>MINQUAL=10
>BBSQUAL=100
>BUFFERS=255
>PACLEN=230
>TRANSDELAY=2
>T3=700
>IDLETIME=900
>BBS=1
>NODE=1
>HIDENODES=0
>ENABLE_LINKED=A
>PORT
>PORTNUM=1
>ID=145.690 MHz 1200 Baud (VHF)
>TYPE=ASYNC
>PROTOCOL=KISS
>IOADDR=02F8
>INTLEVEL=3
>SPEED=4800
>CHANNEL=a
>QUALITY=100
>MAXFRAME=5
>TXDELAY=350
>SLOTTIME=100
>PERSIST=64
>FULLDUP=0
>SOFTDCD=0
>FRACK=4000
>RESPTIME=2000
>RETRIES=5
>PACLEN=230
>MINQUAL=10
>DIGIFLAG=1
>DIGIPORT=0
>USERS=0
>;UNPROTO=W4MIN-1
>ENDPORT
>PORT
>PORTNUM=2
>ID=441.025 MHz 1200 Baud (UHF)
>TYPE=ASYNC
>PROTOCOL=KISS
>IOADDR=03E8
>INTLEVEL=5
>SPEED=9600
>CHANNEL=a
>QUALITY=100
>MAXFRAME=5
>TXDELAY=350
>SLOTTIME=100
>PERSIST=64
>FULLDUP=0
>SOFTDCD=0
>FRACK=4000
>RESPTIME=2000
>RETRIES=5
>PACLEN=230
>MINQUAL=10
>DIGIFLAG=1
>DIGIPORT=0
>USERS=0
>;UNPROTO=W4MIN-1
>ENDPORT
>PORT
>PORTNUM=3
>ID=446.050 9600 Baud (UHF)
>TYPE=ASYNC
>PROTOCOL=KISS
>IOADDR=03F8
>INTLEVEL=4
>SPEED=19200
>CHANNEL=a
>QUALITY=100
>MAXFRAME=2
>TXDELAY=300
>SLOTTIME=100
>PERSIST=64
>FULLDUP=0
>SOFTDCD=0
>FRACK=4000
>RESPTIME=2000
>RETRIES=5
>PACLEN=230
>MINQUAL=10
>DIGIFLAG=1
>DIGIPORT=0
>USERS=0
>;UNPROTO=W4MIN-1
>ENDPORT
>ROUTES:
>***
>APPLICATIONS=BBS
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/mixed
>  text/plain (text body -- kept)
>  text/plain (text body -- kept)
>  application/octet-stream
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>_______________________________________________
>FADCA mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/fadca
>
>  
>