[FADCA] Fbb & BPQ

[Doug Welcker]

Hi Doug...

Off subject but did you know you won a one of the hourly drawings at
Orlando?  The bad news is since it wasn't calmed the threw it back into
the pot for the final drawing.  Sri about that..

73 Doug

Doug Christ wrote:
> 
> Hi all,
> 
> I recently have been experimenting with FBB here and have been trying to get
> it to interface with BPQ. I'm hoping that maybe someone on the list is
> running a similar setup and can give me some pointers.
> 
> These are the ports on my computer
> 
> Port        address     IRQ       Speed
> 1               2f8            3           4800
> 2               3e8           5            9600
> 3               3f8            4           19200
> 
> My port 2 is what is giving me the headache. Yes, the port works running
> under MSYS. When I load BPQ and use the PAC4 program, all of the ports work.
> Only when I load FBB do I get problems with port 2.
> 
> This is my port.sys file settings
> #Ports      TNCs
> 
> 3                      3
> 
> #Com Interface Address (device) Baud
> 
> 1              2             2f8                      4800
> 
> 2              2             3e8                      9600
> 
> 3              2             3f8                      19200
> 
> 0      0    0   0     0     0    0     0    00/01 ---- File-fwd.
> 
> 1    10    1   0   230   2    3    30  05/60 QULWY 145.690
> 
> 2    10    2   0   230   2    3    30  45/60 QULWY 441.000
> 
> 3    10    3   0   230   2    3    30  15/60 QULWY 446.050
> 
> Any and all comments will be appreciated.
> 
> Doug/KN4YT
> 
> _______________________________________________
> FADCA mailing list
> FADCA@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca