[FADCA] How to use MCO?

Mon, 17 Feb 2003 10:46:31 -0500

Dale,

I am not sure what the digi -ssid is for the new station. Bud should know
...he helped set it up.  You can set up TelPac to beacon using two digis but
I don't know if it will work if the first is down.

In the beacon file (if you are using the packet engine) or in the Unproto
path if you are using the tnc direct serial just string the digis with a
connecting comma.

VIA MCO, w4plb-8

if you are running the packet engine set up the Monitor application and you
will see the digi sequence.  I use both COA1 and RPDIGI here.

73,

Rick

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Dale Coleman
Sent: Monday, February 17, 2003 0637 AM
To: [email protected]
Subject: [FADCA] How to use MCO?

Hi all, I see there is a new station in the Orlando area on 145.07. I can
connect direct to it using low power and low antenna but how do I digi off
of it?

I would like to send a beacon every 20 minunts or so letting people know my
TelPac station is available.

My TelPac station can hit w4plb-8 direct, anyway to set the beacon so it
digis off both MCO and w4plb-8 even if one is down?

Thanks, Dale

-
Dale Coleman
[email protected]
http://home.earthlink.net/~kf4sir

_______________________________________________
FADCA mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/fadca