[Elecraft] Sticky low TX power level after ATU activation?
Al Lorona
alorona at sbcglobal.net
Wed Oct 28 20:52:44 EDT 2026
I can't remember who it was on this reflector who submerged a length of window line in his pool and measured the loss. It really didn't change from when it was dry. I believe the electrical length and impedance may have changed slightly, though.
You may find this old post relevant to this discussion:
https://www.mail-archive.com/[email protected]/msg252065.html
By the way, it's great to see an actual question posted here-- something which has become exceedingly rare in the past two years. I thought the reflector had died.
Also, I really enjoyed AB7E Dave's video on dielectric tuning of a dipole. Nice work, Dave.
R,
W6LX/4
On Tuesday, October 27, 2026 at 04:41:51 PM EDT, David Gilbert via Elecraft <elecraft at mailman.qth.net> wrote:
Mostly none of that is true. Just as insulation (with a typical
dielectric constant around 3.0) affects the velocity factor of a wire,
clean water (with a dielectric constant around 80) also affects the
velocity factor of a wire ... except by a lot more.
Of course dirty separators ... and they are almost always
microscopically dirty due to dust buildup in the cracks caused by
sunlight and weathering ... can also affect open wire line when wet by
providing a conducting path, especially at the high voltage points often
existing on open wire line.
But to say that water on an open wire line (like during a rain) doesn't
affect it is simply wrong.
Dave AB7E
p.s. Here is a YouTube video on some dielectric loading tests I did on
a 100 MHz dipole. https://youtu.be/YJTJcWPkVdA
On 10/27/2026 12:45 PM, Jack Brindle via Elecraft wrote:
> I believe window line is the same as ladder line which has a plastic coating on both the wire and separators. Ladder line is definitely subject to change when it gets wet.
>
> Open-wire, on the other hand is not generally subject to change when it gets wet, unless, as Jim points out, the separators have issues when wet. The separators on the open-wire line I have used have not been subject to wet issues, and have worked very well. On the other hand, the ladder line-fed antenna definitely need to be returned when wet.
>
> No idea if this is the issue the original poster was having.
>
> 73,
> Jack, W6FB
>
>
>> On Oct 27, 2026, at 12:19 PM, Jim Brown via Elecraft <elecraft at mailman.qth.net> wrote:
>>
>> On 10/27/2026 7:52 AM, Ray WA6VAB via Elecraft wrote:
>>> Mike.. are you having Wet weather? Rain can affect the Z of an open Wire
>>> System.
>> The very good scientific work I've seen on this was done on Window line, not open wire line, by N7WS more than 20 years ago by N7WS, and published by ARRL in one of their excellent Antenna Compendiums. It would apply to open wire line ONLY with wood insulators.
>>
>> 73, Jim K9YC
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jackbrindle at me.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ab7echo at gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to alorona at sbcglobal.net
More information about the Elecraft
mailing list