[Elecraft] Elecraft Digest, Vol 270, Issue 14
carlos popelier
carlos.on6cn at gmail.com
Thu Oct 15 14:31:16 EDT 2026
hi, ref oscillator high 121099 low 1285
vco test 09149.......
regards carlos
Op do 15 okt 2026 om 18:02 schreef <elecraft-request at mailman.qth.net>:
>
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: K4D drastic decrease in TX Line In level on FT8 (Jim Brown)
> 2. Re: K4D drastic decrease in TX Line In level on FT8 (Jack Brindle)
> 3. Re: K4D drastic decrease in TX Line In level on FT8
> (Rick Bates, nk7i)
> 4. Re: K4D drastic decrease in TX Line In level on FT8
> (Rick Bates, nk7i)
> 5. Re: k2 vco voltage (Andrew Lenton)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 14 Oct 2026 11:08:05 -0700
> From: Jim Brown <jim at audiosystemsgroup.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
> FT8
> Message-ID:
> <3a7d33d8-a55b-4f9d-a42c-32d4c5cfeffa at audiosystemsgroup.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Check settings and levels on Windoze Sound. When they do updates, they
> screw up these settings. They change levels, and I've had them change to
> 44.1 kHz. All the the WSJT software demands 48 kHz 16 bit stereo.
>
> 73, Jim K9YC
>
> On 10/14/2026 8:44 AM, John Klewer via Elecraft wrote:
> > K4D, SN 386, running FT4/8 on Mac-Mini.
> > Line in level was 35 and all worked great.
> > I downloaded JTDX to try it and now WSJT-X requires LINE In level of 250!
> >
> > I have gone over all the computer's audio settings and insured that audio
> > is being steered to WSJT-X....I have not yet uninstalled JTDX but it is
> > "off".
> >
> > Suggestions, please?
> >
> > John, N6AX
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to jim at audiosystemsgroup.com
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 14 Oct 2026 15:33:21 -0500
> From: Jack Brindle <jackbrindle at me.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
> FT8
> Message-ID: <5189ADBC-E061-48BF-9C64-D5DB931171D8 at me.com>
> Content-Type: text/plain; charset=utf-8
>
> Unless Microsoft has found a way to corrupt other operating systems (then we are all in trouble!), this advice does not apply to John?s Mac mini.
>
> I would look for bad interactions between WSJT-X and JTDX, most likely in their settings file. The JTDX app may have corrupted the settings file, thus causing issues. They should have separate settings files, but this isn?t always the case. In derivative applications. In this case the best thing may be to delete both applications, and delete the preferences file(s), then start over.
> The prefs files are in ~/Library/Preferences/ which is to say your home directory, then the hidden Library folder. The best way to get there is to use the Finder?s Go menu, its ?Go To Folder?? item, then paste in the folder path shown above. The look for files that include ?WSJT? and ?JTDX? and delete them.
>
> Hope this helps. And unless you are using a Virtual Machine, AND, your mini uses an Intel processor, don?t worry about the Microsoft advice.
>
> 73,
> Jack, W6FB
>
>
> > On Oct 14, 2026, at 1:08?PM, Jim Brown via Elecraft <elecraft at mailman.qth.net> wrote:
> >
> > Check settings and levels on Windoze Sound. When they do updates, they screw up these settings. They change levels, and I've had them change to 44.1 kHz. All the the WSJT software demands 48 kHz 16 bit stereo.
> >
> > 73, Jim K9YC
> >
> > On 10/14/2026 8:44 AM, John Klewer via Elecraft wrote:
> >> K4D, SN 386, running FT4/8 on Mac-Mini.
> >> Line in level was 35 and all worked great.
> >> I downloaded JTDX to try it and now WSJT-X requires LINE In level of 250!
> >> I have gone over all the computer's audio settings and insured that audio
> >> is being steered to WSJT-X....I have not yet uninstalled JTDX but it is
> >> "off".
> >> Suggestions, please?
> >> John, N6AX
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to jim at audiosystemsgroup.com <mailto:jim at audiosystemsgroup.com>
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to jackbrindle at me.com <mailto:jackbrindle at me.com>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 14 Oct 2026 16:46:06 -0700
> From: "Rick Bates, nk7i" <rick.nk7i at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
> FT8
> Message-ID: <75b430f3-17df-4d8d-8569-a298cc28586a at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> While you dive into the weeds of the setting, in the driver module,
> there is a checkbox to allow sharing *_of the audio_*?from the K4.
>
> Yes, allow sharing in this case; then no program can assume control and
> you can actually run two (or more) apps sharing the audio, at the same
> time (compare apps for example).
>
> While you're there, check that the driver levels are (still) set as you
> need.? Computer levels have to be set, radio levels have to be set;
> together they allow apps to work.? Safe bet that something wonked the
> driver levels.
>
> 73,
> Rick nk7i
>
>
> On 10/14/2026 11:08 AM, Jim Brown via Elecraft wrote:
> > Check settings and levels on Windoze Sound. When they do updates, they
> > screw up these settings. They change levels, and I've had them change
> > to 44.1 kHz. All the the WSJT software demands 48 kHz 16 bit stereo.
> >
> > 73, Jim K9YC
> >
> > On 10/14/2026 8:44 AM, John Klewer via Elecraft wrote:
> >> K4D, SN 386, running FT4/8 on Mac-Mini.
> >> Line in level was 35 and all worked great.
> >> I downloaded JTDX to try it and now WSJT-X requires LINE In level of
> >> 250!
> >>
> >> I have gone over all the computer's audio settings and insured that
> >> audio
> >> is being steered to WSJT-X....I have not yet uninstalled JTDX but it is
> >> "off".
> >>
> >> Suggestions, please?
> >>
> >> John, N6AX
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to jim at audiosystemsgroup.com
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rick.nk7i at gmail.com
>
> ------------------------------
>
> Message: 4
> Date: Wed, 14 Oct 2026 16:49:45 -0700
> From: "Rick Bates, nk7i" <rick.nk7i at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
> FT8
> Message-ID: <b9b13acb-ce59-46e1-8bc4-3daafaa33814 at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> It was my understanding that the app tells (overrides, negotiates with)
> the driver what bit format format to present; that setting at the driver
> level just didn't matter.
>
> Does someone know?? That's REALLY into the weeds.
>
> 73,
> Rick nk7i
>
> On 10/14/2026 11:08 AM, Jim Brown via Elecraft wrote:
> > All the the WSJT software demands 48 kHz 16 bit stereo.
>
> ------------------------------
>
> Message: 5
> Date: Thu, 15 Oct 2026 14:07:44 +0000
> From: Andrew Lenton <a at lenton.org>
> To: Michael Carter <mike.carter at unh.edu>, Elecraft Reflector Reflector
> <elecraft at mailman.qth.net>, mike.carter at unh.edu
> Subject: Re: [Elecraft] k2 vco voltage
> Message-ID: <d938a7ce9fd6b8.270b12f3dc72aa at lenton.org>
> Content-Type: text/plain; format=flowed; charset=utf-8
>
> Hi Carlos,
>
>
>
>
> Have managed to measure the 12.096 MHz Osc yet?
>
>
>
>
> KR
>
>
>
>
> Andrew
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi Carlos,
>
>
>
>
>
>
>
>
>
> After reviewing your description of the sequence of band failures
> (inability to receive and transmit on selected bands) over time, I have an
> idea.
>
>
>
>
>
>
>
>
>
> I would first verify using the K2 internal frequency counter that the PLL
> reference oscillator is working and generating a signal In the 12.090 MHz -
> 12.100 MHz range. This should be true regardless of the band selected. If
> there is no signal at TP3, where
> the PLL reference oscillator feeds the divider/phase detector chip, then
> we can concentrate on getting the reference oscillator working.
>
>
>
>
>
>
>
>
>
> If you do have a signal at TP3 in the correct frequency range, then we can
> investigate the rest of the loop.
>
>
>
>
>
>
>
>
>
> You described first losing reception on the 20 meter band, then lost 40 and
> 80 meters, then all bands ceased to provide reception - is that sequence
> correct?
>
>
>
>
>
>
>
>
>
> There are two critical actions that need to take place to generate the
> correct VCO output frequency: (a) the MCU needs to interpret the band
> select and the tuning encoder to generate the correct programming words for
> the PLL chip, and (b) the MCU needs to send
> the proper code to the IO controller (U1 on the RF board) to activate the
> proper relays for the selected band. If either of those actions fail, then
> the VCO will revert to its free-running frequency because the loop will
> fail to lock. The voltage at R30
> will go to one of the extreme values you measured (8V or ~ 3V).
>
>
>
>
>
>
>
>
>
> The additional fixed and variable (varactors D21 and D22) capacitances that
> are switched into the VCO circuit are controlled by relays K13, K14, and
> K15. On 20 meters, all three relays are switched to the SET position. On
> 80 meters, only K13 is set. On 40
> meters, presuming you do NOT have the K60XV option installed, relays K13
> and K14 are set. On other bands various combinations of K13, K14 and K15
> are set to provide proper tuning capacitance.
>
>
>
>
>
>
>
>
>
> What I am beginning to suspect is one of two causes:
>
>
>
>
> The IOC is not receiving a valid code sequence from the MCU due to AUXBUS
> problems, or
>
>
>
> The IOC has developed a problem(s) on the three relay driver pins for
> K13, K14, and K15.
>
>
>
>
>
>
>
>
>
>
> Without a logic analyzer or some tedious inspection of AUXBUS captures at
> the IOC input, it would be difficult to know if the MCU is sending proper
> programming words to the PLL chip. However, it is possible to verify if
> the proper relays are activated for
> a given band by feeling with your finger each of the relays K13, K14, and
> K15 as you switch from band to band. The relay table in Appendix B of the
> K2 manual gives the relays activated on each band (relays are normally in
> RESET position, and are SET according
> to the selected band.
>
>
>
>
>
>
>
>
>
> If the PLL reference oscillator has failed, that should be easily detected
> using the K2 internal frequency counter at TP3. Don, W3FPR has identified
> the J310 at Q19 as a frequent cause of PLL reference failure, although I
> don't understand how a succession
> of individual band failures over time could be caused by changing JFET
> characteristics over time, especially since Q19 is tuned over a very narrow
> range regardless of selected band.
>
>
>
>
>
>
>
>
>
> If the activated relays K13, K14, and K15 do not properly correspond to the
> selected band, but the MCU does provide the correct PLL divider programming
> words for that band and band segment, then the loop will fail to lock. The
> VCO will revert to some free-running
> frequency that may still enable band noise to be heard, but no signals
> will be heard because of mismatch of the VCO relays and BPF/LPF relay
> settings.
>
>
>
>
>
>
>
>
>
> Please let us know what you find for these two suggested tests.
>
>
>
>
>
>
>
>
>
> 73,
>
>
>
> Mike, K8CN
>
> ------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> End of Elecraft Digest, Vol 270, Issue 14
> *****************************************
--
mvg carlos popelier
regards carlos popelier
More information about the Elecraft
mailing list