[Elecraft] k2
carlos popelier
carlos.on6cn at gmail.com
Thu Oct 15 12:33:25 EDT 2026
no,much time in garden and other cases hix3
mvg carlos popelier
regards carlos popelier
---------- Forwarded message ---------
Van: <elecraft-request at mailman.qth.net>
Date: do 15 okt 2026, 18:02
Subject: Elecraft Digest, Vol 270, Issue 14
To: <elecraft at mailman.qth.net>
Send Elecraft mailing list submissions to
elecraft at mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-request at mailman.qth.net
You can reach the person managing the list at
elecraft-owner at mailman.qth.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elecraft digest..."
Today's Topics:
1. Re: K4D drastic decrease in TX Line In level on FT8 (Jim Brown)
2. Re: K4D drastic decrease in TX Line In level on FT8 (Jack Brindle)
3. Re: K4D drastic decrease in TX Line In level on FT8
(Rick Bates, nk7i)
4. Re: K4D drastic decrease in TX Line In level on FT8
(Rick Bates, nk7i)
5. Re: k2 vco voltage (Andrew Lenton)
----------------------------------------------------------------------
Message: 1
Date: Wed, 14 Oct 2026 11:08:05 -0700
From: Jim Brown <jim at audiosystemsgroup.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
FT8
Message-ID:
<3a7d33d8-a55b-4f9d-a42c-32d4c5cfeffa at audiosystemsgroup.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Check settings and levels on Windoze Sound. When they do updates, they
screw up these settings. They change levels, and I've had them change to
44.1 kHz. All the the WSJT software demands 48 kHz 16 bit stereo.
73, Jim K9YC
On 10/14/2026 8:44 AM, John Klewer via Elecraft wrote:
> K4D, SN 386, running FT4/8 on Mac-Mini.
> Line in level was 35 and all worked great.
> I downloaded JTDX to try it and now WSJT-X requires LINE In level of 250!
>
> I have gone over all the computer's audio settings and insured that audio
> is being steered to WSJT-X....I have not yet uninstalled JTDX but it is
> "off".
>
> Suggestions, please?
>
> John, N6AX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at audiosystemsgroup.com
------------------------------
Message: 2
Date: Wed, 14 Oct 2026 15:33:21 -0500
From: Jack Brindle <jackbrindle at me.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
FT8
Message-ID: <5189ADBC-E061-48BF-9C64-D5DB931171D8 at me.com>
Content-Type: text/plain; charset=utf-8
Unless Microsoft has found a way to corrupt other operating systems (then
we are all in trouble!), this advice does not apply to John?s Mac mini.
I would look for bad interactions between WSJT-X and JTDX, most likely in
their settings file. The JTDX app may have corrupted the settings file,
thus causing issues. They should have separate settings files, but this
isn?t always the case. In derivative applications. In this case the best
thing may be to delete both applications, and delete the preferences
file(s), then start over.
The prefs files are in ~/Library/Preferences/ which is to say your home
directory, then the hidden Library folder. The best way to get there is to
use the Finder?s Go menu, its ?Go To Folder?? item, then paste in the
folder path shown above. The look for files that include ?WSJT? and ?JTDX?
and delete them.
Hope this helps. And unless you are using a Virtual Machine, AND, your mini
uses an Intel processor, don?t worry about the Microsoft advice.
73,
Jack, W6FB
> On Oct 14, 2026, at 1:08?PM, Jim Brown via Elecraft <
elecraft at mailman.qth.net> wrote:
>
> Check settings and levels on Windoze Sound. When they do updates, they
screw up these settings. They change levels, and I've had them change to
44.1 kHz. All the the WSJT software demands 48 kHz 16 bit stereo.
>
> 73, Jim K9YC
>
> On 10/14/2026 8:44 AM, John Klewer via Elecraft wrote:
>> K4D, SN 386, running FT4/8 on Mac-Mini.
>> Line in level was 35 and all worked great.
>> I downloaded JTDX to try it and now WSJT-X requires LINE In level of 250!
>> I have gone over all the computer's audio settings and insured that audio
>> is being steered to WSJT-X....I have not yet uninstalled JTDX but it is
>> "off".
>> Suggestions, please?
>> John, N6AX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jim at audiosystemsgroup.com <mailto:
jim at audiosystemsgroup.com>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com <mailto:jackbrindle at me.com>
------------------------------
Message: 3
Date: Wed, 14 Oct 2026 16:46:06 -0700
From: "Rick Bates, nk7i" <rick.nk7i at gmail.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
FT8
Message-ID: <75b430f3-17df-4d8d-8569-a298cc28586a at gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
While you dive into the weeds of the setting, in the driver module,
there is a checkbox to allow sharing *_of the audio_*?from the K4.
Yes, allow sharing in this case; then no program can assume control and
you can actually run two (or more) apps sharing the audio, at the same
time (compare apps for example).
While you're there, check that the driver levels are (still) set as you
need.? Computer levels have to be set, radio levels have to be set;
together they allow apps to work.? Safe bet that something wonked the
driver levels.
73,
Rick nk7i
On 10/14/2026 11:08 AM, Jim Brown via Elecraft wrote:
> Check settings and levels on Windoze Sound. When they do updates, they
> screw up these settings. They change levels, and I've had them change
> to 44.1 kHz. All the the WSJT software demands 48 kHz 16 bit stereo.
>
> 73, Jim K9YC
>
> On 10/14/2026 8:44 AM, John Klewer via Elecraft wrote:
>> K4D, SN 386, running FT4/8 on Mac-Mini.
>> Line in level was 35 and all worked great.
>> I downloaded JTDX to try it and now WSJT-X requires LINE In level of
>> 250!
>>
>> I have gone over all the computer's audio settings and insured that
>> audio
>> is being steered to WSJT-X....I have not yet uninstalled JTDX but it is
>> "off".
>>
>> Suggestions, please?
>>
>> John, N6AX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jim at audiosystemsgroup.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com
------------------------------
Message: 4
Date: Wed, 14 Oct 2026 16:49:45 -0700
From: "Rick Bates, nk7i" <rick.nk7i at gmail.com>
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K4D drastic decrease in TX Line In level on
FT8
Message-ID: <b9b13acb-ce59-46e1-8bc4-3daafaa33814 at gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
It was my understanding that the app tells (overrides, negotiates with)
the driver what bit format format to present; that setting at the driver
level just didn't matter.
Does someone know?? That's REALLY into the weeds.
73,
Rick nk7i
On 10/14/2026 11:08 AM, Jim Brown via Elecraft wrote:
> All the the WSJT software demands 48 kHz 16 bit stereo.
------------------------------
Message: 5
Date: Thu, 15 Oct 2026 14:07:44 +0000
From: Andrew Lenton <a at lenton.org>
To: Michael Carter <mike.carter at unh.edu>, Elecraft Reflector Reflector
<elecraft at mailman.qth.net>, mike.carter at unh.edu
Subject: Re: [Elecraft] k2 vco voltage
Message-ID: <d938a7ce9fd6b8.270b12f3dc72aa at lenton.org>
Content-Type: text/plain; format=flowed; charset=utf-8
Hi Carlos,
Have managed to measure the 12.096 MHz Osc yet?
KR
Andrew
Hi Carlos,
After reviewing your description of the sequence of band failures
(inability to receive and transmit on selected bands) over time, I have an
idea.
I would first verify using the K2 internal frequency counter that the PLL
reference oscillator is working and generating a signal In the 12.090 MHz -
12.100 MHz range. This should be true regardless of the band selected. If
there is no signal at TP3, where
the PLL reference oscillator feeds the divider/phase detector chip, then
we can concentrate on getting the reference oscillator working.
If you do have a signal at TP3 in the correct frequency range, then we can
investigate the rest of the loop.
You described first losing reception on the 20 meter band, then lost 40 and
80 meters, then all bands ceased to provide reception - is that sequence
correct?
There are two critical actions that need to take place to generate the
correct VCO output frequency: (a) the MCU needs to interpret the band
select and the tuning encoder to generate the correct programming words for
the PLL chip, and (b) the MCU needs to send
the proper code to the IO controller (U1 on the RF board) to activate the
proper relays for the selected band. If either of those actions fail, then
the VCO will revert to its free-running frequency because the loop will
fail to lock. The voltage at R30
will go to one of the extreme values you measured (8V or ~ 3V).
The additional fixed and variable (varactors D21 and D22) capacitances that
are switched into the VCO circuit are controlled by relays K13, K14, and
K15. On 20 meters, all three relays are switched to the SET position. On
80 meters, only K13 is set. On 40
meters, presuming you do NOT have the K60XV option installed, relays K13
and K14 are set. On other bands various combinations of K13, K14 and K15
are set to provide proper tuning capacitance.
What I am beginning to suspect is one of two causes:
The IOC is not receiving a valid code sequence from the MCU due to AUXBUS
problems, or
The IOC has developed a problem(s) on the three relay driver pins for
K13, K14, and K15.
Without a logic analyzer or some tedious inspection of AUXBUS captures at
the IOC input, it would be difficult to know if the MCU is sending proper
programming words to the PLL chip. However, it is possible to verify if
the proper relays are activated for
a given band by feeling with your finger each of the relays K13, K14, and
K15 as you switch from band to band. The relay table in Appendix B of the
K2 manual gives the relays activated on each band (relays are normally in
RESET position, and are SET according
to the selected band.
If the PLL reference oscillator has failed, that should be easily detected
using the K2 internal frequency counter at TP3. Don, W3FPR has identified
the J310 at Q19 as a frequent cause of PLL reference failure, although I
don't understand how a succession
of individual band failures over time could be caused by changing JFET
characteristics over time, especially since Q19 is tuned over a very narrow
range regardless of selected band.
If the activated relays K13, K14, and K15 do not properly correspond to the
selected band, but the MCU does provide the correct PLL divider programming
words for that band and band segment, then the loop will fail to lock. The
VCO will revert to some free-running
frequency that may still enable band noise to be heard, but no signals
will be heard because of mismatch of the VCO relays and BPF/LPF relay
settings.
Please let us know what you find for these two suggested tests.
73,
Mike, K8CN
------------------------------
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must be a subscriber to post.
Elecraft web page: http://www.elecraft.com
End of Elecraft Digest, Vol 270, Issue 14
*****************************************
More information about the Elecraft
mailing list