[Elecraft] Procedure for “ATTN” selection on K4

Drew AF2Z pubx1 at af2z.net
Sun Nov 1 20:53:06 EST 2026


I have suggested that the front end attenuation (ATTN) be incorporated 
into the DSP gain control (M.RF & S.RF).

For example, M.RF would select front end attenuation at the 3, 6, 9, etc 
dB steps but would insert 1dB DSP intermediate steps for 1dB & 2dB; 4dB 
& 5db; 7dB & 8dB; etc.

I don't know a good reason why there should be separate controls for 
front end vs DSP attenuation when one control could incorporate both.

73,
Drew/AF2Z



On 11/1/2026 12:44, Dave Baker via Elecraft wrote:
> It would be better (for me) to be able to select ATTN (long press on the
> PRE button) if the radio went into attenuation mode immediately, rather
> than my needing to tap the resulting "Off" that appears on-screen in order
> to toggle attenuation to turn "On." I've already specifically asked for
> attenuation
> via the long press.
> 
> The current delay needed for tapping/toggling the onscreen "Off" is sorta
> annoying because I've just punched the ATTN in a hurry so as to attenuate
> the sudden surprise 599 that is blasting into my headphones. I would prefer
> an immediate attenuation rather than the delay which is resulting in more
> full-volume dots and dahs into my ears.
> 
> Bonus points:  The degree of attenuation (3 dB, 6 dB, etc.) would appear by
> default as the value at which I set it when I last used ATTN, rather than
> needing to manually ratchet it up to 6 dB, etc.
> 
> Just an ideer.
> 
> Dave Baker WB4AJL
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pubx1 at af2z.net


More information about the Elecraft mailing list