[Elecraft] Procedure for “ATTN” selection on K4

Wayne Burdick n6kr at elecraft.com
Sun Nov 1 12:48:58 EST 2026


Hi Dave,

That's worth considering. 

In the a short term, you can assign attenuator on/off and/or different attenuation values as a single macro that could be assigned to a one-press programmable function switch, i.e. PF1 through PF4. 

Wayne
N6KR

----
elecraft.com

> On Nov 1, 2026, at 9:44 AM, Dave Baker via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> It would be better (for me) to be able to select ATTN (long press on the
> PRE button) if the radio went into attenuation mode immediately, rather
> than my needing to tap the resulting "Off" that appears on-screen in order
> to toggle attenuation to turn "On." I've already specifically asked for
> attenuation
> via the long press.
> 
> The current delay needed for tapping/toggling the onscreen "Off" is sorta
> annoying because I've just punched the ATTN in a hurry so as to attenuate
> the sudden surprise 599 that is blasting into my headphones. I would prefer
> an immediate attenuation rather than the delay which is resulting in more
> full-volume dots and dahs into my ears.
> 
> Bonus points:  The degree of attenuation (3 dB, 6 dB, etc.) would appear by
> default as the value at which I set it when I last used ATTN, rather than
> needing to manually ratchet it up to 6 dB, etc.
> 
> Just an ideer.
> 
> Dave Baker WB4AJL
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com


More information about the Elecraft mailing list