[Elecraft] K2/100

[Andrew Lenton]

Hi I have just performed all the mods on the KPA100 and reset the FWD and 
REF and set the bias at 400mA, my bird watt meter tracks the indicated 
power on the K2 
  
  
  
  
  After fitting the screen and putting it all back together it works fine 
on SSB. 
  
  
  
  
  On low power tune is fine, however on more than 11 Watts pressing tune 
causes the power to jump to 140 and the SWR 2.2:1, so suspecting it is 
"hooting" when all back together. 
  
  
  
  
  
  
  
  Before I dive in an suggestions? 
  
  
  
  
  
  
  
  KR 
  
  
  
  
  Andrew