[Elecraft] K2 interface to Win10 PC

[Dave New, N8SBE]

One item to check is the baud rate, which is only 4800 for the K2.

On 2025-04-09 19:38, Norman Eid DDS MBA via Elecraft wrote:
> I am having difficulty with my PC connecting to my K2.  I have checked 
> the
> serial cable and have its orientation as specified by Elecraft.  The 
> cable
> has no opens and is wired correctly.  I believe I have a software 
> problem
> and not a hardware issue.  I have my ports set as per Elecraft
> recommendations and the PC will not recognize my K2.  I have been 
> trying to
> use Elecraft's remote program as well as HRD; both are not recognized.  
> I
> have read through Elecraft threads on this issue and continue to have 
> no
> success.  I would like to get into digital work.  Any suggestions?  
> Thanks
> for the help.  Norm WB0LRJ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n8sbe at densbe.com

-- 
73,

-- Dave, N8SBE, Hamshack Hotline 550-0971, HamsOverIP 101018, 
AmateurWire 1348