[Elecraft] K3 sidetone level

[Chris]

Thank you all for the replies.  I want to clarify the issue a little bit
better.

Both radios were tested with their internal and MFJ Cleartone speakers.  I
have also tested them with a pair of Kenwood SP-230 speakers.  They all
show equal results.  All tests were done with a single speaker, so no
phasing issue here.

One radio has the firmware 5.67, and the other has 5.2x.  I suspect it is
the firmware issue, but I will report back here after testing them again on
both radios with 5.67.

Best regards,

Chris KM1B


On Fri, Nov 15, 2024 at 2:04 PM Jim Brown <jim at audiosystemsgroup.com> wrote:

> On 11/15/2024 6:00 AM, Peter Lascell wrote:
> > Try the AFX button on the K3, to change the audio phase.
>
> You clearly did not read my post.
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ve3uvt at gmail.com
>